Mexican Media Brands
What Manufacturers Need to Know About Metrology
George Schuetz | Modern Machine Shop
As manufacturing technology advances, measurement processes evolve to stay one step ahead.
DuraTech Industries Licenses TactoTek’s Injection Molded Structural Electronics (IMSE)
| Plastics Technology
The custom graphics manufacturer specializing in in-mold and printed electronics now has the rights to sell, design and produce parts that use TactoTek’s intellectual property.
Austria Showcase: tecnología austriaca para el manejo de residuos
| Plastics Technology México
Si está buscando soluciones innovadoras en los rubros de residuos y reciclaje, no se pierda este foro en el que podrá conocer a importantes proveedores de tecnología de Austria.
Araqev’s QC Software Helps Limit Design Iterations
| Additive Manufacturing
The company says the software’s machine-learning models enable it to derive modifications to the nominal designs, so when the modified designs are printed, they will exhibit fewer shape deviations compared to when original designs are printed.
Metallurgically Bonded, Platinum-Clad Anode Products
Chris Pasion | Products Finishing
Anomet’s Platinum Clad Anodes feature a full metallurgical bond of platinum or niobium over a copper core and are dimensionally stable, which reportedly provides impressed current protection with lower operating current densities.
Transición energética: oportunidades de producción para el sector metalmecánico
Ángela Andrea Castro | Modern Machine Shop México
Un estudio de la Asociación Alemana de Fabricantes de Máquinas-Herramienta (VDW) proyecta oportunidades de producción de piezas metálicas que apoyarán la transición energética e insta a los fabricantes de máquinas-herramienta a expandir su base de clientes para incluir a esta industria.
Lanzan mascarillas FFP2 fabricadas con polipropileno reciclable de Borealis
| Plastics Technology México
Un nuevo esquema de recolección y reciclaje convierte máscaras faciales usadas en productos de valor agregado en colaboración con Borealis.
Morf3D, Siemens Advanta Collaborate on Applied Digital Manufacturing Center
| Additive Manufacturing
Digital planning for Long Beach, California, factory will evolve into an ongoing technology development partnership between the two companies.
SMW Autoblok presentó el collet chuck híbrido Comot-AZ
| Modern Machine Shop México
El collet chuck de cambio rápido, de SMW Autoblok, cuenta con capacidades de diámetro estándar en la industria de 42, 65 y 100 mm.
Next-Generation Industrial Desktop 3D Scanner for QC
| Plastics Technology
Exact Metrology’s newest version of Artec Micro boasts ultra-high precision.
Producción manufacturera de Nuevo León muestra crecimiento en marzo
| Modern Machine Shop México
De acuerdo con Caintra, la producción manufacturera presentó una recuperación en diferentes indicadores, como el volumen físico que alcanzó 59 puntos y nuevos pedidos que llegó a 60 puntos.
Desarrollan pintura para combatir infecciones hospitalarias
| Products Finishing México
Investigadores de la Universidad Estatal de Tomsk (TSU), en Rusia, desarrollaron una nueva pintura que tiene capacidad para neutralizar patógenos comunes y reducir las infecciones adquiridas en hospitales.
6 Reasons Space Exploration Will Need Additive Manufacturing
Stephanie Hendrixson | Additive Manufacturing
There are at least half a dozen ways 3D printing will contribute to space travel, research and habitation — and in some cases it already is. Insights from seminar focused on manufacturing challenges for the space sector.
Front-Mount-Base Clamp Extends Workholding Flexibility
| Modern Machine Shop
Destaco’s four front-mount-base Manual Clamps improve operational safety by providing additional clearance. They also reduce interfering contours.
How Serious Are You About Cybersecurity?
Derek Korn | Production Machining
Given that manufacturers currently are the primary targets for ransomware attacks, you should be taking action now to prevent such an incident while being prepared to nimbly react if one occurs.
Ingersoll Supports Alfa Romeo F1 Team
| Additive Manufacturing
The partnership includes the creation of a joint development lab involving the Camozzi Research Center (CRC) in Milan, Italy, and the Sauber Technologies headquarters in Hinwil, Switzerland.
Australia’s Gale Pacific, Deakin University to develop novel composite fabric
Grace Stubbins | CompositesWorld
The technical fabrics manufacturer will harness research capabilities at Deakin’s Carbon Nexus facility to increase product range and applications.
#workforcedevelopment
Solvay expands Solvalite portfolio into automotive, invest in Xencor LFT production facilities
Grace Stubbins | CompositesWorld
New fast curing carbon fiber and woven fabric prepregs target high-volume automotive applications such as body panels with optimized structural part performance.
Internally Heated Sprue Bushings Optimize Melt Flow Control
Chris Pasion | MoldMaking Technology
Melt Design Inc.’s Equatemp Single Zone Hot Sprue Bushings are internally heated and feature a high purity ceramic insulator, replaceable thermocouple and predetermined wattage distribution.
Airborne introduces Automated Ply Placement technology at JEC World 2022
Grace Stubbins | CompositesWorld
Automated, accurate and fully integrated preforming process maximizes design freedom of composite laminates, expands material options.
Strohm and Petronas join forces to commercialize thermoplastic composite pipes
Grace Stubbins | CompositesWorld
Strohm says the agreement will be instrumental in expanding knowledge of the design, production and qualification standards of its TCP products for the replacement of metallic pipes.
Brand Advertising. It’s not just about “how”
| Gardner Web
Brand marketing strategy depends on a long-term commitment to both the hows and whys that make it work.
#brandbuilding