Mexican Media Brands
Up, not out: The next chapter of CompositesWorld
Jeff Sloan | CompositesWorld
I have been editor-in-chief of CompositesWorld for 17 years, which translates into a lot of editorials. This will be my last as I become publisher of CW. We welcome Scott Francis back to the brand to take my place.
Oxygen Permeation System Also Tests Relative Humidity
Lilli Manolis Sherman | Plastics Technology
Ametek Mocon expands Ox-Tran 2/28 instrument portfolio
PhysicsX, Velo3D Partner to Provide Engineers with AI Simulation Tooling
Angela Osborne | Additive Manufacturing
The collaboration gives Velo3D customers access to AI-enabled physics simulation and optimization capabilities, and gives PhysicsX customers increased manufacturing flexibility to produce their most advanced concepts.
Prueban con éxito empaques para alimentos mediante reciclaje avanzado
Marcela Castro | Plastics Technology México
ExxonMobil, Cyclyx International, Sealed Air y Ahold Delhaize USA generan alianza para demostrar que una economía circular en envases de plástico para alimentos es posible.
Tolerancing in Mold Design, Part 2: Using GD&T to Address Conventional Tolerancing Issues
| MoldMaking Technology
Mold designers can achieve a single interpretation of workpiece functionality when following the American Society of Mechanical Engineers Geometric Dimensioning and Tolerancing standard.
Mold Ejector Accelerators Achieve Second-Stage Ejection
| MoldMaking Technology
Progressive Components says its Ejector Accelerators can be used when additional pin travel is required to release molded parts from lifters, stripper plates or deep core features, without the need for a second set of ejector plates.
Suhner's Robotic Compliance System Provides Compact Operation
Chris Pasion | Modern Machine Shop
The fully electric EFC-02 compliance system provides users with simple robot programming for setting up complex processes.
Destacan dinamismo del sector manufacturero en el Estado de México
Mauricio Pineda | Modern Machine Shop México
Empresas como Excel Turbines de México ampliarán sus actividades, mientras que Valeo instalará una nueva planta de producción en la entidad.
Sistema de manufactura aditiva de metales EOS M 290
Ángela Andrea Castro | Modern Machine Shop México
FITMA: EOS North America (stand 2736) presentará el sistema de manufactura aditiva de metal la EOS M 290.
Intrinsic Viscosity Enhancer for rPET and PET Food-Contact Applications
Lilli Manolis Sherman | Plastics Technology
Nexam’s Nexamite MO2100 rebuilds molecular weight and increases IV to enable upcycling of rPET.
Bluco Corp. Receives Recognition for Company Culture
Chris Pasion | Modern Machine Shop
The NABR has named Bluco as one of Chicago’s “Best and Brightest Companies to Work For” for the third consecutive year.
NASA pursues lunar terrain vehicle services for Artemis missions
Grace Stubbins | CompositesWorld
NASA is seeking industry proposals before July 10, 2023, for the development and demonstration of a next-gen LTV for crewed and uncrewed exploration of the moon during Artemis missions.
Noncontact Laser Scanner Enhanced for Mold Inspection Suitability
| MoldMaking Technology
Wireless Nikon Metrology LC15Dx inspection tool features increased resolution and accuracy of data acquisition for continuous feedback of metrology information, further enhancing its versatility and efficiency.
Composites pioneers Donna Dawson, Bob Griffiths pass
Jeff Sloan | CompositesWorld
Dawson and Griffiths died in early May and had a long, lasting and positive impact on the composites industry and CompositesWorld.
Social Media: A Newer, Needed Toolset for B2B Marketing Success
| Gardner Web
Social media marketing has become a must-have in B2B. Harnessing its power, taking the reins of the journey and avoiding pitfalls are essential.
MoldMaking and Molding Conference Sessions Finalized
| MoldMaking Technology
August 29-30 in Minneapolis all things moldmaking and injection molding will be happening at the Hyatt Regency — check out our speakers and topics!
New Michigan Technical Center for YCM Alliance
| MoldMaking Technology
YCM Alliance held a grand opening of its new Technical Center in Sterling Heights, Michigan, last week, which is the first in a series of centers designed to showcase and demo machining solutions for die and mold machining, ultra-high-speed machining and general parts machining.
Upgraded CT Scanning and Multi-Sensor Coordinate Measuring Machines
Lilli Manolis Sherman | Plastics Technology
Werth’s TomoScope S Plus 240 systems boast more than double the measuring volume as their predecessor with almost the same size.
LNS North America's Bar Feeder Increases Throughput
Chris Pasion | Modern Machine Shop
The GT 342 automatic magazine bar feeder enables higher spindle speeds for greater throughput from sliding headstock turning machines.
VulcanForms Is Forging a New Model for Large-Scale Production (and It's More Than 3D Printing)
Stephanie Hendrixson | Additive Manufacturing
The MIT spinout leverages proprietary high-power laser powder bed fusion alongside machining in the context of digitized, cost-effective and “maniacally focused” production.
Sodick Open House Event Will Showcase Machining Portfolio
Chris Pasion | Modern Machine Shop
The company’s Advanced Technology Show takes place on June 6 and 7, 2023, at the company’s headquarters in Schaumburg, Illinois.
Pymes serán las grandes beneficiadas del nearshoring
Mauricio Pineda | Modern Machine Shop México
De acuerdo con Luis Antonio Ramírez, director de NAFIN y Bancomext, las pymes serán las grandes beneficiadas del nearshoring en México.