Mexican Media Brands
Lights Out Machining With An Automated 5-Axis Cell
| Modern Machine Shop
Legacy Precision Molds takes us on a tour of their moldbuilding facility. They've recently implemented two automated 5-axis cells for metal and graphite machining that run lights out during nights and weekends.
Resinas de polietileno: monomodales vs vimodales en empaques
| Plastics Technology México
Descubra las diferencias clave entre las resinas monomodales y bimodales. Impacto, aplicabilidad y sostenibilidad en la industria de empaques.
Centro de mecanizado de cinco ejes C650, de Hermle, para la producción de moldes
Ángela Andrea Castro | Modern Machine Shop México
Meximold: En el stand 202, Hermle presentará el modelo C650, el cual ha sido diseñado pensando en la alta complejidad de la producción de moldes y troqueles.
Descifrando la prueba MFR: implicaciones en polímeros y plásticos
Michael Sepe | Plastics Technology México
Aunque es a menudo criticada, la prueba de velocidad de flujo de la masa fundida (MFR) es un muy buen indicador del peso molecular promedio relativo del polímero. Ya que el peso molecular (MW) es la fuerza impulsora detrás de rendimiento en polímeros, resulta ser un número muy útil.
New HDPE Grade for Mono-Material Machine Direction Oriented Films
| Plastics Technology
Exxon introduced HD7165L for MDO film applications designed for recyclability.
Prueba de velocidad del flujo MFR: cómo realizarla
Michael Sepe | Plastics Technology México
Conozca cómo el peso molecular influye en las pruebas MFR, impactando propiedades como resistencia al impacto y fatiga.
Reconversión de botellas PET: de vertederos a estabilizadores de tierra
María Natalia Ortega Leyva | Plastics Technology México
Investigadores canadienses encuentran una innovadora solución que reutiliza residuos de PET en vertederos, fortaleciendo el suelo y evitando la liberación de contaminantes.
Guía de limpieza para el sistema de plastificación
Timothy Womer | Plastics Technology México
Todo lo que necesita saber sobre la limpieza y mantenimiento del sistema de plastificación. Descubra cómo minimizar el tiempo de parada y desperdicios en procesos de extrusión y moldeo por inyección.
Desafíos en la ventilación de moldes: velocidad de flujo y calidad
Jim Fattori | Plastics Technology México
Descubra la ciencia detrás del sistema de venteo en el moldeado de plástico. Desde su funcionamiento básico hasta cómo el aire y el plástico interactúan para obtener piezas de calidad.
Report addresses advancements, challenges in hydrogen value chain
Grace Stubbins | CompositesWorld
IDTechEx gives an overview of the solutions that currently exist for hydrogen storage and distribution, and how these two components are vital to ensuring the full potential of this rapidly growing sector.
Face Milling Inserts Dedicated to Workpiece Material Range
| MoldMaking Technology
Dormer Pramet launches five variants of its square-shaped positive inserts, each of which are designed for roughing or milling a specific metal material group.
Complex recycled CFRTP parts demonstrate discontinuous fiber advantages
Grace Stubbins | CompositesWorld
CAMX 2023: herone GmbH is showcasing a set of tubes, shafts and profiles, all of which demonstrate the feasibility of rCF discontinuous fibers molded into complex thermoplastic composite parts.
Reusable vacuum bagging, vacuum sealing solution
Grace Stubbins | CompositesWorld
CAMX 2023: SWORL is highlighting its spray-fabricated reusable vacuum bags (membranes, foils) and a new sealing product for more sustainable, out-of-autoclave composites processing.
SEWS invertirá 10 millones de dólares en Tabasco
| Modern Machine Shop México
Sumitomo Electric Wiring Systems instalará una planta manufacturera de arneses eléctricos para vehículos en el Parque Industrial TBC en Cunduacán, Tabasco.
Joint Ribbon Cutting at Fagor, Danobat Showrooms
Eli Plaskett | Modern Machine Shop
Danobat and Fagor co-hosted an inaugural event for their co-located facilities in the Chicago area.
Navy Improves Readiness of USS Bataan With 3D Printing Capability
Angela Osborne | Additive Manufacturing
Crew of USS Bataan completed the first metal 3D part fabrication and replacement for a de-ballast air compressor in only five days using a permanently installed metal 3D printer, demonstrating the impact this technology can have on operational readiness.
Rust Converter Simplifies, Expedites Rust Removal
| Products Finishing
Water-based, low odor Ferrozinc is a rust conversion solution capable of converting rust in 30 minutes, according to HMG Paints and is available in 250 mL size.
Smart Layer Software Automates Visual Monitoring for Additive Manufacturing
Angela Osborne | Additive Manufacturing
Smart Layer software conducts a layer-by-layer analysis using computer vision algorithms and convolutional neural networks, then provides anomaly detection in real-time.
AddUp Participates in $1.5M USAF Research on IN-718 Additive Manufacturing
Angela Osborne | Additive Manufacturing
AddUp is partnering with Zeda to provide critical project support to provide the USAF with a set of manufacturing guidelines to maximize the capabilities of LPBF to meet fleet readiness and sustainment goals.
PPG Commits $5 Million to Environmental Sustainability Education
| Products Finishing
The investment focuses on empowering and educating the next generation and communities on sustainability.
Impacto de la temperatura en las propiedades de los polímeros
Michael Sepe | Plastics Technology México
Explore cómo la temperatura afecta las propiedades mecánicas de polímeros. Entienda el DMA y su relevancia para evaluar propiedades de carga.
Consortium Aims to Bring High-Value 3D Printing to UK
Angela Osborne | Additive Manufacturing
Additive manufacturing experts aim to create accessible, large-format additive manufacturing technology that will make UK manufacturing more competitive and sustainable.