Mexican Media Brands
Matte Coating for Refinish, Industrial Aftermarkets
| Products Finishing
The low premium, low-gloss urethane protective coating is durable and flexible.
Openness to New Manufacturing Techniques Gives Mayer Tool & Engineering a Competitive Edge
Christina Fuges | MoldMaking Technology
This Michigan mold builder adapts, problem solves, brainstorms and collaborates to exceed customer expectations.
EMO: insertos de roscado de doble cara para la industria petrolera
Eduardo Tovar | Modern Machine Shop México
Vargus presentó la nueva línea de herramientas MACH 25 enfocada en el mecanizado de componentes para la industria petrolera.
Fakuma 2023: 3D-Printed Manifold Eliminates Dead Spots Behind Valve Pins
| Plastics Technology
Hasco’s new Streamrunner Shadowfree 3D-printed hot runner manifold is said to eliminate areas of poor flow behind valve pins.
GBM's Covid-19 Official Protocol (and how to get more free tests!)
| GROW
With the fall weather and selling season upon us, Gardner is traveling more than ever and illnesses of all sorts are more likely to spread here at the office and at home. Here’s our stay-well plan!
Dyndrite Powers BCN3D’s High-Viscosity, Production-Oriented VLM System
Angela Osborne | Additive Manufacturing
The collaboration brings users high-performance, end-use resin part printing with GPU-powered automated production software.
Seres Selects Dürr for Paint Shop Installation
| Products Finishing
Dürr installed a paint shop for electric vehicle manufacturer Seres that focuses on energy and resource efficiency.
Printing From Pellet for Lower Cost, Higher Tensile Strength
| Plastics Technology
Material qualification testing highlights advantages of skipping the filament in printing polyetherimide parts for aerospace applications.
PPG Partners With Dutch University for Off-Road Solar Car
| Products Finishing
The Stella Terra vehicle uses PPG’s CoraChar fire protection coatings.
Sistemas completos para reciclaje de Coperion y Herbold en Plastimagen
Marcela Castro | Plastics Technology México
Plastimagen: Las compañías desarrolladoras de soluciones para reciclaje, Coperion y Herbold, se unen en la feria con la exhibición de una simulación de planta de reciclaje de PET.
Ultrafiltration Membranes, Filter Elements for Improved Industrial Water Reuse
| Products Finishing
Ultrafiltration membranes help with water reuse in a variety of applications.
Spirax Sarco Introduces Exhaust Vapor Condenser
| Valve Magazine
New product utilizes flash steam from discharge and exhaust vent pipework to preheat makeup or process water, recovering energy that would otherwise be lost to atmosphere.
Avient presents Hammerhead sandwich panels for boatbuilders
Grace Stubbins | CompositesWorld
Continuous glass fiber-reinforced thermoplastic panels offer the marine industry lightweighting and production efficiency compared to traditional construction materials.
Digital Customer Platform Expands Automation Convenience, Support
| MoldMaking Technology
KUKA introduces a relaunched my.KUKA.com platform, offering expanded user interface and product finding capabilities for an intuitive, easy-to-use destination for in-depth customer resources and support.
Airbus unveils PioneerLab twin-engine flying laboratory
Grace Stubbins | CompositesWorld
Digital systems, bio-based and recyclable composites and other workstreams specifically dedicated to twin-engines will be tested and matured aboard Airbus’ helicopter demonstrator.
Kordsa celebrates 50 years in advanced materials
Grace Stubbins | CompositesWorld
Based in Izmit, Turkey since 1973, Kordsa celebrates its efforts in tire and construction reinforcement and composite technologies, as well as customer and employee support.
Multimodal Powders Bring Uniform Layers, Downstream Benefits for Metal Additive Manufacturing
Stephanie Hendrixson | Additive Manufacturing
A blend of particle sizes is the key to Uniformity Labs’ powders for 3D printing. The multimodal materials make greater use of the output from gas atomization while bringing productivity advantages to laser powder bed fusion and, increasingly, binder jetting.
Video: Multimodal Powders for Metal 3D Printing
Stephanie Hendrixson | Additive Manufacturing
Rather than uniform particle diameters, multimodal powders combine particles of different sizes. In this video, how and why Uniformity Labs produces multimodal metal powders for additive manufacturing.
Intermaq presenta soluciones de mecanizado CNC
Mauricio Pineda | Modern Machine Shop México
Con el objetivo de presentar soluciones de mecanizado, estrechar relaciones con clientes, proveedores y colaboradores, Intermaq realizó un open house en Querétaro.
Dow: 15 años impulsando la innovación y la sustentabilidad en Querétaro
María Natalia Ortega Leyva | Plastics Technology México
Dow conmemora el 15° aniversario de su planta en Querétaro con un evento que destaca su compromiso con el desarrollo económico y tecnológico del estado.
Soluciones de refaccionamiento para moldes de HPDC
Ángela Andrea Castro | Modern Machine Shop México
Meximold: En el stand 518, Dynamo proporciona un amplio espectro de soluciones en refaccionamiento para moldes de HPDC.
Resinas recicladas posconsumo de México Recicla
Marcela Castro | Plastics Technology México
Plastimagen: El fabricante México Recicla destacará en la feria su gama resinas recicladas que incluyen polietileno de alta densidad y polipropileno, así como envases con contenido reciclado posconsumo (PCR).