Mexican Media Brands
Hardinge Talent 42/51 Multitasking CNC Lathe Offers High-Speed, Fine Surface Machining
Angela Osborne | Production Machining
The machine includes featuring iHMI and high-speed, fine surface machining capabilities.
Fabrisonic Smart Baseplate Measures Stress in PBF Builds
| Additive Manufacturing
The baseplate with embedded sensors is designed to measure loads and monitor quality during PBF builds.
Inside a Large-Scale Metal Additive Manufacturing Facility: AM Radio #7
Julia Hider | Additive Manufacturing
This large medical manufacturer added metal 3D printing to its wide range of machining processes, and has since grown its AM division to include 30 printers. On this episode of AM Radio, we discuss how metal AM operates at such a large scale.
TEGO Cure 100: endurecedor termoestable que garantiza el curado a temperatura ambiente
| Products Finishing México
El endurecedor TEGO Cure 100 es termoestable hasta 650 °C y “elimina la necesidad de un secado costoso y que consume mucha energía en el horno”.
In-situ composites sensors for increased production rates, smart processes and life cycle monitoring
Ginger Gardiner | CompositesWorld
Com&Sens FBG sensors are embedded into pressure vessels, rudders and bridges, with new edge and surface connection technology, aimed at cost-effective serial production and monitoring of composite structures.
Bimbo y Grupo Altex reciben reconocimiento por sus empaques sustentables
| Plastics Technology México
La segunda edición de Goula Awards reconoció la innovación y diseño de los empaques de Grupo Bimbo y Grupo Altex, cuyas propuestas destacan la visión de sustentabilidad de ambas firmas
MMT Chats: 5 in 5 with Mark Gauvain
Christina Fuges | MoldMaking Technology
For this MMT Chat: 5 in 5—that’s 5 best practices in five minutes on ways to improve efficiencies—I chat with Mark Gauvain, one of MMT’s Editorial Advisory Board members who made the move to moldmaking/molding consulting. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.
“Nuestra visión es liderar la revolución de los residuos”: nueva CEO y presidente de TOMRA
María Natalia Ortega Leyva | Plastics Technology México
Tove Andersen, nueva presidente y CEO de TOMRA, nos habló sobre la visión que tiene la compañía de origen noruego para contribuir con las ambiciosas metas globales de economía circular. Aquí, la colaboratividad entre todos los nodos de la cadena de valor, así como las tecnologías, de la mano de la inteligencia artificial, marcarán el rumbo.
Kyocera actualiza la herramienta de fresado trocoidal y de tallado de alta velocidad
| Modern Machine Shop México
Kyocera SGS Precision Tools amplió la serie de herramientas T-Carb de la serie 51 con el objetivo de incluir una configuración de extremo de bola.
Volkmann Dust Collection System Earns ATEX Certification for Explosive Environments
| Additive Manufacturing
Volkmann’s VSHC dust collection system certified safe for dust cleanup in hazardous zones.
Video Tech Brief: Dual Thread Whirling on a Swiss-Type CNC Lathe
Derek Korn | Production Machining
The dual thread whirling units on Tsugami Swiss-type lathes can produce medical bone screws with two different thread leads in one setup, eliminating the need for single-point threading.
HP, AM Solutions Jointly Develop 3D Automatic Unpacking Station
| Additive Manufacturing
Joint development is said to offer significant productivity increase, greatly improved cost efficiency and higher powder reclaim rate for certain geometries.
NGR aumenta su capacidad con nuevas instalaciones en Estados Unidos
| Plastics Technology México
NGR, especialista en sistemas para reciclaje de plásticos, trasladó sus instalaciones cerca del Aeropuerto Internacional de Atlanta, Georgia.
Mexstamp inaugura planta en Aguascalientes
| Modern Machine Shop México
Con una inversión de 35 millones de pesos Mexstamp inauguró sus nuevas instalaciones en el Parque Industrial Chichimeco de la entidad.
Seco Tools' New Insert Series is Capable of Milling Tough Materials
Chris Pasion | Modern Machine Shop
According to Seco Tools, the single-sided, straight-edge insert geometries ensure high feed per tooth whether ramping, pocketing, plunging or performing face or copy milling.
Deimco Hosts U.S. Senator Joni Ernst
Scott Francis | Products Finishing
The company’s 10,800 square foot expansion was opened in early 2021 and is now fully operational.
Desktop Metal Completes Acquisition of ExOne
| MoldMaking Technology
ExOne will continue to operate as a wholly owned subsidiary of Desktop Metal and will remain headquartered in North Huntingdon, Pennsylvania.
The Native Labs launches new Composite Materials course
Grace Stubbins | CompositesWorld
Online, self-paced course takes users through three blocks — materials, processes and design — to provide a comprehensive understanding of how to work with composites.
Harry Moser Inducted to AME Hall of Fame
| MoldMaking Technology
Moser is president of the Reshoring Initiative, a nonprofit that aims to help companies bring jobs back to the United States.
3D-Printed Stainless Steel Vent Pins Produce Defect-Free, Injection-Molded Parts
| MoldMaking Technology
The Innovent Pin from Next Chapter Manufacturing is said to offer 10-15 times the volume of venting over traditional venting methods with suitability for filled and unfilled plastic resin grades.
Dual-purpose, full-foiling yacht concept incorporates carbon fiber composites
Grace Stubbins | CompositesWorld
A collaboration between Persico Marine, Pininfarina Nautical and Carkeek Design Partners is to develop a lightweight yacht that can transition between day sailing and regatta racing modes.
Sustainability in Manufacturing Is Footprint and Handprint — and Additive Aids Both
Peter Zelinski | Additive Manufacturing
The scope of AM’s impact changes the terms of the argument around resource re-use and conservation.