Sustainability Correspondents - Page 1044 of 6514

Toray achieves NADCAP accreditation for thermoplastic prepreg manufacture

Grace Stubbins | CompositesWorld

Toray reported to be the first composites company to receive the Non-Metallic Materials Manufacturing – Thermoplastic Prepreg Manufacturing AC7124/6 certification.

Tool Caddy Safely Stores Cutting Tools

| MoldMaking Technology

The Kaiser Manufacturing Tool Caddy makes it convenient for the operator to grab toolholders without any risk of cuts.

Machina Labs awarded contract for robotic composites manufacturing

Grace Stubbins | CompositesWorld

The initiative, enabled by the U.S. Air Force, is designed to advance metal tooling for high-rate production of composites.

Lamborghini developments highlight continued focus on composites

Gary S. Vasilash | CompositesWorld

The Lamborghini, the purveyor of superb sportscars, has long been involved in composites, but has noted an increase in the lightweight materials’ application.

Life on Both Sides of the Pond

| Gardner Web

After graduating from college with no direction of where to go, an interview at a mysterious company unexpectedly became the launching point and home for Ellen’s career.

Life on Both Sides of the Pond

| GROW

After graduating from college with no direction of where to go, an interview at a mysterious company unexpectedly became the launching point and home for Ellen’s career.

Sodick - Plustech Inc. PTXPO Spotlight

| Plastics Technology

Plustech discusses the upcoming Plastics Technology Expo (PTXPO) March 29-31

Illig y Neste colaboran en soluciones sostenibles para empaques

Marcela Castro | Plastics Technology México

Neste e ILLIG iniciaron una asociación estratégica para promover el uso de soluciones más sostenibles en la producción de envases de plástico termoformado.

Hypertherm Partners With Sofos Robotics on Offline Programming

Chris Pasion | Modern Machine Shop

Sofos Robotics uses Robotmaster to perform cell design, reach and feasibility studies, as well as programming services.

Netstal incluyó en sus máquinas una opción para eficiencia energética

Marcela Castro | Plastics Technology México

Con este anuncio, Netstal ofrece una reducción de presión del sistema adaptativo de las máquinas de moldeo por inyección, lo que se traduce en una disminución en el consumo de energía.

Five-Axis Machining Center Performs Cutting Operations in a Single Setup

| Production Machining

PMTS 2023: Haas’ UMC-350HD is a compact five-axis universal machining center Capable of performing 3+2 and five-axis machining simultaneously.

Get to Know the PMPA at PMTS 2023

Derek Korn | Production Machining

The Precision Machining Technology Show provides the chance to see what membership in the Precision Machined Products Association offers at the association’s co-located National Technical Conference.

Double Cone, Pull Collets for High Runout Accuracy, Friction Prevention

Angela Osborne | Production Machining

PMTS 2023: Both the Double Cone and Pull Collets come with a Kroko slots option that prevents chips and dirt from getting into the bore and slots.

Haimer Products Enhance Shrink-fit Toolholding

Chris Pasion | Modern Machine Shop

Eastec 2023: The Power Clamp Air i4.0 and the Nano NG i4.0 are specially designed for the shrink-fit process.

Better Edge's Drill Point Features Unique Geometry

Chris Pasion | Modern Machine Shop

PMTS 2023: The Bat Wing point geometry provides optimized gashing for lower thrust, polished flutes for increased chip evacuation and coolant gash channels for optimum flow.

PTXPO 2023 Preview: Unlocking Your Next Solution for Mold Maintenance, Repair and Surface Treatment

| MoldMaking Technology

PTXPO 2023 houses exhibitors that are ready to provide services and solutions for mold maintenance, repair and surface treatment challenges.

Attention to Measurement

| Products Finishing

English vs. Metric — which should you use? Ron Kinne of Haviland Enterprises Inc. explains why you need a firm understanding of both for measuring various aspects of plating processes.