Mexican Media Brands
NCC, BCI, Vestas collaborate to enhance wind blade technology development
Jessica Pompili | CompositesWorld
NCC, BCI and Vestas have established the U.K. Offshore Wind Industrial Growth Plan, aiming to accelerate wind blade technology development and lower energy costs.
Evonik publishes life cycle assessment data in online database
Jessica Pompili | CompositesWorld
Evonik has made LCA information available for its High Performance Polymers Plastics database, which incorporates its fiber-reinforced and transparent polyamide products.
Dawn Aerospace reusable rocket-powered aircraft flies twice in one day
Grace Stubbins | CompositesWorld
Eighth and ninth flights of composites-intensive Mk-II Aurora reach an altitude of 63,000 feet, demonstrates same-day reusability capability for rocket-powered systems.
Aurora reveals SPRINT fan-in-wing design progress
Grace Stubbins | CompositesWorld
Development of uncrewed demonstrator with 45-foot wingspan, 1,000-pound payload to prove high-speed, vertical-lift, runway-independent mobility.
Emuge-Franken USA Hosts Manufacturing Month Event
Jessica Pompili | MoldMaking Technology
Emuge-Franken USA hosts Manufacturing Month, an event located at its Massachusetts headquarters to include live machining demos and opportunities to meet with industry professionals.
Ceramic Media Filters Out Metals for Less
Lori Beckman | Products Finishing
A low-cost alternative to legacy technologies, this ceramic molecular media filtration system removes metals and pollutants from industrial wastewaters at a low price point.
Custom Workholding Shaves Days From Medical Part Setup Times
Evan Doran | Modern Machine Shop
Custom workholding enabled Resolve Surgical Technologies to place all sizes of one trauma part onto a single machine — and cut days from the setup times.
Dive Into 3 Different Mold Shops With Me
Fiona Lawler | MoldMaking Technology
As MMT's newest team member, I've had the opportunity to visit three very different mold shops. Learn more about the differences and similarities I saw among the shops I visited, but most importantly, the aspect of community I saw within each.
CW Tech Days event delves into composites in space
Jodee McElfresh | CompositesWorld
Composites have been used in space since our early steps into the cosmos. Today, private companies are partnering with NASA and the ESA in new and exciting ways. CW Tech Days: New Space Applications explores this evolving dynamic.
Kaiser Milling, Grooving Tool Provides Greater Circular Accuracy
Chris Pasion | Production Machining
The Mill A Groove tool can be used to cut step grooves, convex and concave radius grooves, chamfered edges, angles and special profiles with a single insert.
Self-Learning Control Algorithm for Temperature-Controlled Hot Runner Balancing
Tony Deligio | Plastics Technology
At Fakuma 2024, Kistler presents the new ComoNeo 7.0 process-monitoring system with the Multiflow 2.0 feature update for consistent temperature control in multicavity molds.
Get the Most From Fiber-Reinforced Thermoplastic Composites Parts
| Plastics Technology
There are five specific areas that designers and manufacturers need to consider to realize the potential of these unique materials.
Kyocera End Mill Line Enables Ramping, Helical Interpolation
Jessica Pompili | Modern Machine Shop
Kyocera SGS Precision Tools Inc. presents its Z-Carb XPR end mill line with plunging and ramping capabilities, equipped with an open end tooth design and two standard coatings for extended tool life.
Precision Machining Activity Contraction Continues — But More Slowly
Mike Shirk | Production Machining
Down overall, the index showed some areas of improvement this month.
Never Say There Wasn’t Enough Time
Matthew Kirchner | Products Finishing
When a commitment is missed, begin with honesty. Instead of saying you didn’t have time, explain the circumstance and own it.
Powder Coating Company Makes Organizational Structure Changes
Jenn Cammel | Products Finishing
Professional Plating makes structural changes to the organization including the promotion of two employees.
Shorter Supply Chains, Reduced Cavitation
Stephanie Hendrixson | Additive Manufacturing
Baker Hughes has replaced its assembled trim stacks for industrial valves with 3D printed versions that can be built all as one piece. The devices counter cavitation to protect the valves, and the change in manufacturing method has enabled the company to bring most of this production in-house.
The Grieve Corporation Celebrates 75th Anniversary
Jenn Cammel | Products Finishing
The Grieve Corp. marks 75 years in business. It currently occupies a 100,000 ft.2 facility in Round Lake, Ill.
How to Fix Predicted Warpage Before It Happens with Windage and CAD Model Morphing
Peggy Malnati | MoldMaking Technology
Applying windage and model-morphing techniques saved toolmaker/molder Sturgis Molded Products the time, cost, headaches of multiple part/mold design iteration loops, cumbersome cooling fixtures, and long molding cycles.
Metal Finishing Conference Highlights Industry Strengths
Lori Beckman | Products Finishing
The MFASC one-day conference offers exhibits, workshops and networking for members and non-members from across the country.
Inteligencia artificial y aprendizaje automático en máquinas-herramienta
| Modern Machine Shop México
La inteligencia artificial (IA) está transformando los procesos de producción mediante el aprendizaje automático, el análisis de datos y los gemelos digitales. Tecnologías como AI Chip Removal, de DMG MORI, optimizan la eliminación automática de virutas en máquinas-herramienta, mejorando la eficiencia y el rendimiento. Descubra estas innovaciones.
PFAS Destruction System Secures First U.S. Sale
Jenn Cammel | Products Finishing
Axine Water Technologies will sell its first commercial-scale system for PFAS destruction to Lacks Enterprises Inc.