Mexican Media Brands
Walter's New Inserts Machine Non-Ferrous Materials
Chris Pasion | Modern Machine Shop
The polished rake face of the new inserts is said to improve chip removal, and the extremely sharp cutting edge creates a softer cutting action. The softer cutting action enables machining of unstable components and components with long overhangs.
Integi presenta en FITMA sus nuevos modelos de herramientas de bruñido
| Modern Machine Shop México
FITMA: Integi (stand 1419) presenta los nuevos modelos de herramientas de bruñido
High-Performance Chip Splitter Maximizes Metal Removal Rate
Chris Pasion | Modern Machine Shop
Hanita’s VariMill Chip Splitter is said to deliver higher metal removal rate (MRR) by separating long, undesirable, stringy chips from deep cavities and dynamic milling paths by cutting material into shorter, more manageable sections.
Amerimold 2021 Post-Show Flashback: Build
| MoldMaking Technology
MMT looks back on the return of an in-person Amerimold in September after a year-long pandemic.
A 'Microscopic' Look at ISO 16232 Standard Analysis
| Production Machining
This article gives three key points that should be confirmed with a microscope support team or within microscope software to ensure that proper settings are in place to detect, measure and categorize most particles for automotive manufacturing.
#regulations
Becton Dickinson invertirá 56 millones de dólares en el Estado de México
| Modern Machine Shop México
La inversión de Becton Dickinson será para una nueva línea de producción, así como para construir una nueva planta de ensamble.
Becas del Instituto Powder Coating abiertas también a estudiantes de México
| Products Finishing México
El Powder Coating Institute de Estados Unidos anunció que su programa de becas abrirá en enero de 2022 y pueden solicitarlas estudiantes de Canadá, Estados Unidos y México.
eG-SERIES, de PTi, optimiza el soporte de rodillo configurable
| Plastics Technology México
La eG-SERIES, de Processing Technologies International (PTi), ofrece la versión de soportes de rodillos más compacta ofrecida actualmente por PTi, beneficiando a aquellos con un espacio de producción muy limitado.
El CICY: simbiosis entre ciencia y tecnología para investigación sobre polímeros
| Plastics Technology México
El Centro de Investigación Científica de Yucatán (CICY) cuenta con una Unidad de Materiales, desde la cual contribuye a la investigación e innovación de polímeros. Conozca más se este centro, ubicado en el sureste mexicano.
OnRobot’s Magnetic Gripper for Safe, Precise Material Handling, Assembly
Angela Osborne | Production Machining
Unlike standard magnetic grippers, the MG10 has programmable force features and comes with built-in grip and part detection sensors.
Wittmann Group to Drop Battenfeld Name in Branding
| Plastics Technology
The Austrian based maker of injection molding machine, robotics and auxiliaries had combined the brand names for injection molding related offerings, reflecting its acquisition of Battenfeld in 2008.
Addcomposites adds tape winding to Finland facility for pilot trials
Grace Stubbins | CompositesWorld
The new capability, which enhances the available level of design freedom, was added to encourage manufacturers to develop new innovations using tape winding.
MT Aerospace proves out CFRP hydrogen tank for rocket propulsion
Grace Stubbins | CompositesWorld
Comprehensive test campaign under the ESA’s ComET project proves linerless composite pressure tank prototype can withstand cryogenic stresses inherent to rocket flight.
Indexable Thread Mill Demonstrates Universal Metal Cutting
| MoldMaking Technology
T2710 indexable thread milling cutter brings high productivity, reliability and quality to the machining of short threads.
Cortec Launches Quick-Dry Coating for Spray, Dip Lines
Chris Pasion | Products Finishing
Cortec’s EcoShield 386 FD force-dries in 5-10 minutes at 150°F and has good hot hardness, which keeps the hot coated parts from sticking together before they can cool down.
Expanded Line of Nanotube Water-Based Dispersions From OCSiAl
Chris Pasion | Products Finishing
Applications for the new nanotube solutions include ultra-thin coatings, such as UV coatings and coatings on polyethylene terephthalate (PET) and anti-static binders with no changes in processing and retained level of rheology.
Airborne participates in three technology development projects for new mobility solutions
Grace Stubbins | CompositesWorld
Airborne will develop new digital and automated composites manufacturing technologies to advance maturation of UAM, civil aviation and automotive projects.
NCC’s all-composite Type V tank demonstrates future composite space tank technology
Grace Stubbins | CompositesWorld
SpaceTank project delivers a 96-liter carbon fiber composite tank with 4.0-5.50-millimeter nominal wall thickness for 30% weight savings in launch vehicle and satellite propellant tank applications.
Hexcel prepregs power cleaner ocean transport with Chantiers de l’Atlantique Silenseas project
Grace Stubbins | CompositesWorld
HexPly supplied M9.6 carbon fiber prepregs for a 34-meter-high cruise ship mast. Silenseas production scale-up objectives for future vessels intend for the development of three 66-meter-high carbon fiber masts.
3D Printed Lattice Structures Replace Foam Components: AM Radio #9A
Julia Hider | Additive Manufacturing
On this episode of AM Radio, Stephanie Hendrixson and Julia Hider examine the use of 3D printed components with lattice structures to replace foams.
El sistema EOS M 290 ofrece impresión fiable
| Modern Machine Shop México
FITMA: EOS (stand 2042) presentará en la feria el sistema EOS M290 de impresión 3D.
Los Technology Days de Arburg se posponen para junio de 2022
| Plastics Technology México
Pensando en la seguridad de sus visitantes, Arburg anunció que el evento se llevará a cabo, presencialmente, entre el 22 y el 25 de junio de 2022 en sus instalaciones de Lossburg, Alemania.